Atrust T180L Скачать руководство пользователя страница 65

Страница: 65 / 236

Configuring Client Settings

Configuring System Settings

NOTE

•

To use the Quick Connection mode, ensure that both the Appliance and Autostart

modes are disabled. By default, your t180L/t180LB is in the Quick Connection mode,

and both the Appliance and Autostart modes are disabled. However, if either of two

modes are enabled, the Quick Connection mode will fail to work.

•

For more information on the Appliance mode, please refer to section “4.2.7 Enabling

or Disabling the Appliance Mode” on page 50.

•

For more information on the Autostart mode, please refer to the following sections:

“4.6.5 Configuring Advanced RDP Connection Settings” on page 131

“4.6.11 Configuring Advanced ICA Connection Settings” on page 169

“4.6.14 Configuring Advanced View Connection Settings” on page 202

To enable/disable the Quick Connection mode, please do the following:

1. On Atrust Client Setup, click

System

Quick Connection

2. Click to check/uncheck

Enable Quick Connection after Power-up

to enable/disable the Quick Connection

mode, and then click

Save

to apply the change.

NOTE

•

For advanced Quick Connection settings, please refer to the next section (4.2.10).

Содержание T180L












































































































































































































































Результаты поиска

Содержание T180L

Отзывы:

Atrust T180L, Руководство пользователя, Страница: 65 / 236

Результаты поиска

Содержание T180L

Отзывы: