Atrust T180L, Руководство пользователя, Страница: 148 / 236

Configuring Client Settings
Configuring Service Access Settings
138
RemoteFX USB Redirection Settings
Item Description
Use RemoteFX USB Redirection
Check/Uncheck to enable/disable locally attached USB devices in a Remote
Desktop session (virtual machine based only).
NOTE: RemoteFX USB Redirection allows the redirection of USB devices into
server-hosted virtual machines (with guest operating systems).
NOTE: RemoteFX USB Redirection is only applicable to the virtual machine based
Remote Desktop service not to session based one. For more information,
please visit Microsoft Support website at support.microsoft.com .
On the client side, please do the following to enable locally attached USB devices
in a virtual machine based desktop:
1. Ensure that the desired USB device has been connected to your client.
2. Ensure that RemoteFX is enabled on your t180L/t180LB (see “Use
RemoteFX” on page 135).
3. Click to check Use RemoteFX USB Redirection .
4. A new checkbox appears with the required device driver. Check to enable
the driver.
5. Click Save to apply.
NOTE: You also need to configure the host server and its guest OSs to enable
RemoteFX USB Redirection in a Remote Desktop session. For instructions
on server-side configuration, please visit Microsoft Support website at
support.microsoft.com .
RD Gateway Sub-tab
Connection Settings
Item Description
Use RD Gateway server
Check/Uncheck to enable/disable the use of an RD Gateway server. When
checked, the following two items in this table appear.
Server Name
Type the name of the RD Gateway server. Ask the network administrator for
this information.
Use my Remote Desktop
credentials for the RD Gateway
Check to use the same set of credentials for authenticating to both the Remote
Desktop computer and the RD Gateway server.
Bypass RD Gateway for
local address
Check to prevent traffic to and from local network addresses from being routed
through the RD Gateway server. This could make your RDP connection faster.