Atrie DB-120 User Manual
User Manual
27
Figure 19 (Update Gateway)
3.7.5
PING TEST
Once you have your gateway configured, it is a good idea to make sure you can Ping the network.
You can get to the Ping web page by going to the Home screen, under the Tools title, click Ping Test.
Type the target address that you want to pin. If you have your PC connected to the gateway via the
default DHCP configuration, you should be able to Ping the network address 192.168.1.1. If your ISP
has provided their server address you can try to ping the address. If the pings for both the WAN and
the LAN side complete, and you have the proper protocols configured, you should be able to surf the
Internet.
By default when you select ping test, the gateway will ping itself 3 times. As shown in Figure 20, the
gateway passed the Ping test; this basically means that the TCP/IP protocol is up and running. If this
first Ping test does not pass, the TCP/IP protocol is not loaded for some reason; you should restart the
modem.
