background image

                                                                 

Atrie DB-120 User Manual

 

User Manual 

20

 

Figure 13 (Management IP address) 

The apply button will temporarily save this connection. To make the change permanent you need to 
click on 

Tools

 (at the top of the page) and select 

System Commands

.  At the system commands page, 

click on 

Save All

 

3.6.2

 

PORT FORWARDING 

Using the Port Forwarding page, you can provide local services (for example web hosting) for people 
on the Internet or play Internet games. When users send this type of request to your network via the 
Internet, the Router will forward those requests to the appropriate PC. Port forwarding can be used 
with DHCP assigned addresses but remember that a DHCP address is dynamic (not static).  For 
example, if you were configuring a netmeeting server, you would want to assign this server a static IP 
address so that the IP address is not reassigned.  Also remember that if an Internet user is trying to 
access an Internet application, they must use the WAN IP address.  The port forwarding will translate 
the WAN IP address into a LAN IP address. 
 
To configure a service, game, or other application select the external connection (for example the 
Internet connection), from the Home screen, click Advanced and under Advanced, select Port 
Forwarding. Next select the computer hosting the service and add the corresponding firewall rule. If 
you want to add a custom application, select the User category, click New and fill in the port, 
protocols and description for your application. 
 
For example, if you want to host a Netmeeting session, from the Home screen, click Advanced and 
under Advanced, select Port Forwarding.  First select the IP address for your Netmeeting server.  Next 
select the Audio/Video category and add Netmeeting to the applied rules box.  To view the 
management rules, highlight Netmeeting and select view; this will display the pre configured 
protocols and ports that Netmeeting will use.   Now assuming that your WAN connection is correct, 
you can run Netmeeting from your server and call users that are on the Internet.  If you know your 
WAN IP address, users can call you. 

 

Содержание DB 120


































Отзывы: