SW5501 – SW5502
Wireless Serial Server
User Manual
Configuration and
setup
backup configuration file to the device
.
Once the backup configuration file is successfully uploaded, the device will
restart
.
Note that the time needed for this process may vary on the equipment used
.
Figure 4.46
Backup
/
Restore Setting Page
4.9.5
Management List
The
Management List
is used to filter the MAC addresses that can have access to the Web management interface
or Web UI
.
When
Management List
is enabled, only the MAC addresses entered in the list of allowed MAC address
can gain access to the Web UI of SW550X
.
Check the radio button in front of
the
“
Allow uses with MAC addresses
listed below
”
to enable the MAC address list
.
Note that the
Access Control List
allows
user to input up
to 10 MAC
addresses and must be entered in the XX
:
XX
:
XX
:
XX
:
XX
:
XX format
(
where XX are hexadecimal numbers
).
Figure 4.47
Management List Page
