SW5501 – SW5502
Wireless Serial Server
User Manual
Configuration and
setup
After finish configuring the Operation Mode, please click on Save Settings button to keep the change
that you have
made and to apply your setting
.
A pop
-
up window with a message
“
Please wait for a while
…”
will appear as shown
below. When the saving is finished, the pop
-
up windows will disappear and return to the Operation Mode page
.
Figure 4.15
Waiting Message
If you only want to save the settings and restart the device to a selection of
Operation Mode, you can click
“
Apply
”
button
to apply the setting and reboot the SW550X device
.
Note that after clicking the
“
Apply
”
button, the user will
briefly see the same pop
-
up window as in above and after a few second another pop
-
up window will appear as
shown below
.
Then, you will be redirected back to the Operation Mode page
.
Figure 4.16
Completion of the settings and counting down for a page reload
The next figure shows an example of AP Client operation mode setting
.
Note that the graphic image on the right
side of the box isplays the SW550X as the blue circle with an Ethernet connection to a device denoted with a green
circle
.
The remote access point
(
AP
)
that provides wireless access is still represented by the orange circle
.
