Atmark Armadillo-IoT Gateway G3 Скачать руководство пользователя страница 48

Страница: 48 / 129

target Bluetooth.

[ OK ] Stopped target Sound Card.

Stopping User Manager for UID 0...

Stopping WPA supplicant...

Stopping Authenticate and Authorize Users to Run Privileged Tasks...

Stopping Bluetooth service...

[ OK ] Stopped target Graphical Interface.

[ OK ] Stopped target Multi-User System.

Stopping Modem Manager...

Stopping Regular background program processing daemon...

Stopping Network Manager...

Stopping Lighttpd Daemon...

IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ OK ] Stopped target Login Prompts.

Stopping Getty on tty1...

Stopping Serial Getty on ttymxc4...

Stopping LSB: exim Mail Transport Agent...

Stopping Avahi mDNS/DNS-SD Stack...

Stopping D-Bus System Message Bus...

Stopping System Logging Service...

[ OK ] Stopped Bluetooth service.

[ OK ] Stopped Modem Manager.

[ OK ] Stopped Regular background program processing daemon.

[ OK ] Stopped Network Manager.

[ OK ] Stopped Avahi mDNS/DNS-SD Stack.

[ OK ] Stopped D-Bus System Message Bus.

[ OK ] Stopped System Logging Service.

[ OK ] Stopped Lighttpd Daemon.

[ OK ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.

[ OK ] Stopped Getty on tty1.

[ OK ] Stopped Serial Getty on ttymxc4.

[ OK ] Stopped WPA supplicant.

[ OK ] Stopped User Manager for UID 0.

[ OK ] Unmounted /opt/license.

[ OK ] Stopped LSB: exim Mail Transport Agent.

[ OK ] Stopped target Network is Online.

Stopping Login Service...

[ OK ] Removed slice user-0.slice.

[ OK ] Removed slice system-serial\x2dgetty.slice.

[ OK ] Removed slice system-getty.slice.

Stopping /etc/rc.local Compatibility...

[ OK ] Stopped /etc/rc.local Compatibility.

Stopping Permit User Sessions...

[ OK ] Stopped target Network.

[ OK ] Stopped Login Service.

[ OK ] Stopped Permit User Sessions.

[ OK ] Stopped target Remote File Systems.

[ OK ] Stopped target Remote File Systems (Pre).

[ OK ] Stopped target Basic System.

[ OK ] Stopped target Slices.

[ OK ] Stopped target Paths.

[ OK ] Stopped target Timers.

[ OK ] Stopped target Sockets.

[ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.

[ OK ] Closed Syslog Socket.

[ OK ] Closed D-Bus System Message Bus Socket.

[ OK ] Stopped target System Initialization.

Stopping Load/Save RF Kill Switch Status of rfkill1...

Armadillo-IoT Gateway G3Product Manual - INTL

Startup and Shutdown

Содержание Armadillo-IoT Gateway G3

































































































































Результаты поиска

Содержание Armadillo-IoT Gateway G3

Отзывы:

Похожие инструкции для Armadillo-IoT Gateway G3

Бренды по названию

Популярные бренды

Atmark Armadillo-IoT Gateway G3, Руководство по эксплуатации продукта

Результаты поиска

Содержание Armadillo-IoT Gateway G3

Отзывы:

Похожие инструкции для Armadillo-IoT Gateway G3

Бренды по названию

Популярные бренды