2.5. Block Diagram
The block diagram of the Armadillo-IoT gateway is as follows.
Figure 2.2. Armadillo-IoT Gateway Block Diagram
[1]
2.6. Software Make-up
The following explains about the makeup of the software that runs on Armadillo-IoT.
Table 2.4. Software Available for Armadillo-IoT
Software
Description
U-Boot
The bootloader. In the factory default state the bootloader image is located in the QSPI Flash memory, but it can also be placed
on the SD card.
Linux Kernel
A Linux kernel in the uImage format can be used. In the factory default state the Linux kernel image is located in the eMMC,
but it can also be placed on the SD card by using bootloader functionality.
[1]
For the dotted line blocks, whether they are mounted or not depends on the product model. For the model with the 3G module, the 3G module, CON11
and CON17 are equipped and CON10 is not equipped. For the model without the 3G module, CON10 is equipped and the 3G module, CON11 and CON17
are not equipped.
Armadillo-IoT Gateway G3Product Manual - INTL
Product Overview
19
