Atmark Armadillo-IoT Gateway G3 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 129

background image

Chapter 3. Before Turning on Armadillo

3.1. Preparation

Before using Armadillo, please prepare the following as required.

Work PC

A PC that runs either Linux or Windows which has a network interface and at least one
USB port. Please refer to Section 3.2, “Setup of Environment for Development and
Operational Checks” and set up the development and operational check environment
on the work PC.

Network Environment

Please connect the Armadillo and Work PC so that they can communicate via a network.

SD Card

Used when checking the operation of the SD slot.

USB Memory

Used when checking USB operation.

MicroSIM (UIM Card) and
APN Information

These are used to confirm 3G operation. A contract with a telecommunications carrier
is required. In order to check the operation of SMS, a MicroSIM (UIM card) with SMS
function is required.

Software to Extract tar.xz For-
mat Files

Used when creating the development and operational check environment. On Linux,
tar

[1]

can be used for the extraction. For Windows, 7-Zip and Lhaz etc can be used. 7-

Zip is included on the development DVD.

3.2. Setup of Environment for Development and Operational
Checks

A VMware virtual machine data image is provided to allow easier software development and operational checks of Atmark

Techno products. The VMware virtual machine data image is referred to as ATDE (Atmark Techno Development Envi-
ronment). To start ATDEm, VMware virtualization software is used. The ATDE image data is compressed in the tar.xz
format. Please extract it with the tools suitable for your environment.

In addition to VMware, Oracle VM VirtualBox is also a well know virtualization
program. Oracle VM VirtualBox has the following features.

• Provided under GPL v2 (General Public License version 2)

[2]

• Supports VMware virtual disk (.vmdk) files

It is possible to start ATDE with Oracle VM and use it as the software development
environment,

The Atmark Techno products supported differ depending on the ATDE version. The ATDE compatible with this product

is ATDE6 v20160321 or later.

ATDE6 is based on Debian GNU/Linux 8 (codename jessie) and the cross development tools necessary for software

development and performing the operational checks of Armadillo-IoT Gateway are preinstalled.

[1]

Specify the

Jxf

options to expand tar.xz format files.

[2]

PUEL (VirtulBox Personal Use and Evaluation License) may be applied up to version 3.x.

Armadillo-IoT Gateway G3Product Manual - INTL

Before Turning on Armadillo

21

«
...
19
20
21
22
23
...
»

Содержание Armadillo-IoT Gateway G3


































































































































Отзывы:

Нет отзывов

Похожие инструкции для Armadillo-IoT Gateway G3

Бренд: CTC Union Страницы: 4

Бренд: Deb Страницы: 4

DMX ETHERGATE MK3

Бренд: Enttec Страницы: 6

Mobile Gateway 3.0

Бренд: SmartKitchen Страницы: 4

Бренд: WePresent Страницы: 8

Бренд: VBOX Страницы: 11

MULTIVOIP MVP-410ST

Бренд: Multitech Страницы: 8

MultiVOIP 100 MVP120

Бренд: Multitech Страницы: 48

Conduit MTCDT-L4E1

Бренд: Multitech Страницы: 28

VoiceGATE 8D5499

Бренд: Digicom Страницы: 29

Бренд: Dr. Neuhaus Страницы: 2

Бренд: VOPtel Страницы: 38

Бренд: VOPtel Страницы: 49

Бренд: Packet Power Страницы: 2

HomePortal 3700HGV

Бренд: 2Wire Страницы: 4

Бренд: IEI Technology Страницы: 34

PathBuilder S200 Series

Бренд: 3Com Страницы: 162

Бренд: SmartRG Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды