AT-UHD-PRO3-1616M
66
EDID page
The Web GUI
EDID Reset
Click this button to reset all EDID settings to the factory-default settings. Note that this will erase any stored EDID
data in memory.
Output 1 - Output 20
Click the
EDID Memory
drop-down list to select the memory location where the EDID, displayed under the Output
EDID column, will be stored. Note that each drop-down lists is available, only if a sink device is connected to the
output.
Save
Click this button to commit all changes for outputs.
Cancel
Click to abort changes.
Input 1 - Input 16
Click the EDID Selection drop-down lists to assign the desired EDID to an input. Stored EDID data will also be
displayed in these drop-down list if EDID data was captured. Refer to
for more
information.
Save
Click this button to commit all changes for inputs.
Cancel
Click to abort changes.