AT-UHD-PRO3-1616M
62
The Web GUI
Control page
Power
Click
ON
to power-on the matrix.
Click
OFF
to place the
matrix in standby mode. Refer to
for more information on standby mode.
IR
Enables or disables the IR ports on the matrix.
Key Lock
Click
ON
to lock the button on the front panel. Click
OFF
to unlock the front-panel buttons. When the front-
panel buttons are locked, the
POWER
button will flash
blue.
Factory Default
Click the
Reset Now
button to set the matrix to factory-
default settings.
NTP Server
Click this drop-down list to specify the desired NTP
server. Two NTP servers are available:
Server 1
or
Server 2
.
Time Zone
Click this drop-down list to select the desired time zone.
The default setting is Greenwich Mean Time (GMT).
Blink LED
Click the
Blink
button to flash the
POWER
button on
the front panel. When clicked, the
Blink
button will read
Blinking
and the
POWER
button will flash blue.
This process will continue until the
Blinking
button is
clicked.
RS-232
Click these drop-down lists to select the required baud
rate and parity bit for the device that is being controlled.
Save
Click this button to commit all changes.
Cancel
Click to abort changes.
