AT-UHD-PRO3-1616M
42
Using the web GUI
Basic Operation
1.
Login to the web GUI. Refer to
Introduction to the Web GUI (page 57)
for more information.
2. Click
EDID
, under the
Configuration
section in the menu bar on the left side of the screen.
3.
Click the EDID Selection drop-down list, next to the desired input, to select the EDID. In this example, the
ATL
720P DD
EDID is being selected for
HDMI IN 3
.
Note that if a custom EDID was stored in memory, from a downstream sink device, it will also be displayed in the
drop-down list. Refer to
Copying a Downstream EDID (page 43)
for more information.
4. Click the
Save
button to commit changes. The source device, routed to this input, will now use this EDID instead
of the downstream EDID (of the sink device).
