AT-UHD-PRO3-1616M
52
Advanced Operation
4.
Launch a web browser and login to the web GUI. Refer to
Introduction to the Web GUI (page 57)
for more
information. The factory-default username and password are listed below:
Username:
root
Password:
Atlona
5. Click
Control
in the side menu bar.
6. Select the proper baud rate, data bit, parity, and stop bit settings for the HDBaseT OUT port. These settings
must correspond with the RS-232 settings of the receiver unit (e.g. AT-UHD-100CE-RX). Referring to the
example diagram on the previous page,
ZONE OUT 3
will need to be configured.
7. Click the
Save
button to commit changes.
8.
Use the following command to send a command to the display (sink) device, where
display_command
is the
command data to send:
RS232Zone4[display_command$0d]
$0d
(carriage return) should only be added to end of the string if the sink device is expecting this character.
