Atlona AT-UHD-PRO3-1616M, Руководство пользователя

Страница: 23 / 79

AT-UHD-PRO3-1616M 23
1. Make sure the home screen is displayed. If the home screen is not displayed, press the CANCEL button to
return to the home screen.
2. Press and release the desired input from the bank of numerical buttons on the front panel. In this example,
HDMI IN 3 will be selected by pressing button 3 .
When the AT-UHD-PRO3-1616M is shipped from the factory, the matrix is set to “one-to-one” routing mode. This
means that input 1 is routed to output 1, input 2 is routed to output 2, and so on. The following section describes
how to change the routing state. When changing the routing state, the input is specified first, then the output.
The AT-UHD-PRO3-1616M can route individual inputs to outputs or can route a single input to all outputs,
simultaneously.
4. Press the button for the desired output. If a different output is desired, press the CANCEL button to return to the
home screen, then press the button of the desired output. In this example, HDBaseT OUT 4 will be selected by
pressing button 4 .
5. Press the ENTER button to complete the routing process. The front panel display will confirm the current routing
selection.
AT-UHD-PRO3-1616M
FCN CANCEL EDID INFO
POWER ENTER 5 6 7 8
1 2 3 4
HDBaseT OUT
1ED 2ED 3ED 4ED 5ED 6ED 7ED 8ED 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18
19 20
HDMI OUT
AUDIO OUT
1
L R
2
L R
3
L R
4
L R
5
L R
6
L R
7
L R
8
L R
9
L R
10
L R
11
L R
12
L R
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8
IR OUT IR IN
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
IR IN RS-232
MAIN
RX TX S LAN FW
OFF
ON
PWR: 100-240VAC 50/60Hz
HDMI IN
9 10 11 12 13 14 15 16


Basic Operation
Select input 03
enter to confirm
Select OUTPUT 04
enter to confirm
iNPUT 03 ROUTED to
OUTPUT 04
Routing Inputs to Outputs
3. Press the ENTER button to confirm the selected input. If a different input is desired, press the CANCEL button
to return to the home screen, then press the button of the desired input.
Single Input-to-Output Routing
Using the Front Panel