ATLET 110781 Скачать руководство пользователя страница 61

Страница: 61 / 120

T S

VIIC

E M

Trro

blle

e ssh

ottiin

g -

- o

peerraattiio

naal

l d

diissttu

urrb

baan

nccee

Elle

cttrriic

stte

0..6

bll

ll d

dii

Warning!

Always make sure that the regulators are corre

Always make sure that the regulators are correctly discharged by removing

ctly discharged by removing

the battery plug and waiting for 2 minutes before fuses are changed, risk

the battery plug and waiting for 2 minutes before fuses are changed, risk for

for

arcing.

Important!

The regulators are discharged more quickly if the battery

The regulators are discharged more quickly if the battery plug is removed

plug is removed

when the emergency stop control is in its

when the emergency stop control is in its upper mechanical position.

upper mechanical position.

10.

10.15.

15.5

5 The

The driv

drive reg

e regula

ulator s

tor sta

tatus i

tus indic

ndicator

ator

The drive regulator status indicator is flashing

If the truck has been run with a heavy

If the truck has been run with a heavy
load and at a high speed and with many

load and at a high speed and with many
stops and starts or in any other way

stops and starts or in any other way
exceeded its limitations, try to reduce

exceeded its limitations, try to reduce
the speed, load, acceleration and

the speed, load, acceleration and
retardation (braking).

retardation (braking).

Increased friction, increased load, high

Increased friction, increased load, high
speed and rapid starting/stopping

speed and rapid starting/stopping
increase the average current from the

increase the average current from the
regulator. The truck may have been

regulator. The truck may have been
driven over its maximum performance.

driven over its maximum performance.

1. The truck must be logged on.

1. The truck must be logged on.
Does the status lamp flash?

Does the status lamp flash?

Yes

Look for an error code and go to the

Look for an error code and go to the
related trouble shooting chart.

related trouble shooting chart.

No (the status lamp is dimmed)

2. Is there a supply voltage B+ 48V to

2. Is there a supply voltage B+ 48V to
the regulator's connector E1.24

the regulator's connector E1.24

šš

Go to point 5

Go to point 5 below.

below.

Yes

3. Battery voltage low?

Yes

Charge and check the battery.

4. Change the drive regulator.

Point 5 and downwards only apply to

Point 5 and downwards only apply to
trucks with fly by wire steering.

trucks with fly by wire steering.

https://www.besttruckmanuals.com/

Содержание 110781

























































































































Результаты поиска

Содержание 110781

Отзывы:

ATLET 110781, Руководство по обслуживанию, Страница: 61 / 120

Результаты поиска

Содержание 110781

Отзывы: