ATLET 110781, Руководство по обслуживанию

Страница: 39 / 120

E Elle ec cttrriic ca al l s sy ys stte em m 1 10 0..3 39 9
A Attlleett''s s ttrru ucck k cco om mp pu utteer r A AT TC C A AT TL LE ET T S SE ER RV VIIC CE E M MA AN NU UA AL L
Factory set values Factory set values
* For URF the value is 0. * For URF the value is 0.
The parameters that the driver can adjust make up a percentage of the value in the The parameters that the driver can adjust make up a percentage of the value in the
category he/she has been placed in. For
category he/she has been placed in. For example, the top speed is set example, the top speed is set by: by:
Note! Note!
If the parameter "Max. speed reverse" If the parameter "Max. speed reverse" is set lower than 100% it will also be is set lower than 100% it will also be
added to the above calculation example when reversing. added to the above calculation example when reversing.
Note! Note!
When the parameter for soft hydraulics is 1, When the parameter for soft hydraulics is 1, the soft hydraulics are forced the soft hydraulics are forced in. in.
The driver cannot set the Soft Hydraulics The driver cannot set the Soft Hydraulics parameter to 0 and get hard parameter to 0 and get hard
hydraulics. hydraulics.
Individual driver settings Individual driver settings
Each driver ID code can have its own performance profile, but this must be linked Each driver ID code can have its own performance profile, but this must be linked
to one of the four dr to one of the four driver categories. When a new driver is defined a iver categories. When a new driver is defined a new question is new question is
asked “Driver category”? - at the end of asked “Driver category”? - at the end of the sequence. On delivery the factory code the sequence. On delivery the factory code
1/2222 is linked to “AC 1/2222 is linked to “AC Driver 1” category. Driver 1” category.
Function Function
Performance category Performance category
1 1 2 2 3 3 4 4
Drive speed Drive speed
1 10 00 0 8 80 0 5 50 0 1 10 00 0
Creep speed Creep speed 4 40 0 4 40 0 4 40 0 5 50 0
Current limit Driving Current limit Driving 1 10 00 0 9 90 0 8 80 0 1 10 00 0
Acceleration drive Acceleration drive 8 80 0 7 70 0 6 60 0 1 10 00 0
Reduction brake, drive Reduction brake, drive 9 90 0 7 75 5 7 70 0 1 10 00 0
Reverse brake Reverse brake
7 75 5 7 70 0 7 70 0 1 10 00 0
Pedal braking Pedal braking
1 10 00 0 1 10 00 0 9 90 0 1 10 00 0
Maximum backward speed Maximum backward speed 1 10 00 0 8 80 0 8 80 0 1 10 00 0
Maximum pump speed Maximum pump speed 1 10 00 0 1 10 00 0 9 90 0 1 10 00 0
Maximum lowering speed Maximum lowering speed 1 10 00 0 1 10 00 0 1 10 00 0 1 10 00 0
Acceleration pump Acceleration pump 1 10 00 0 1 10 00 0 9 90 0 1 10 00 0
Soft hydraulics Soft hydraulics
0 0 0 0 1 1* * 0 0
Top speed = Machine parameter (see 2.1) × Driver category % (see 2.2) × Driver's own Top speed = Machine parameter (see 2.1) × Driver category % (see 2.2) × Driver's own
settings %
settings %
Example: Top speed = 12 km/h × 90% × 100% = 10.8 km/h. Example: Top speed = 12 km/h × 90% × 100% = 10.8 km/h.
https://www.besttruckmanuals.com/