manualshive.com logo in svg

Atlas Copco ZR 110, Инструкция

Поделиться
Скачать
Atlas Copco ZR 110 Скачать руководство пользователя страница 19

• Gear casing
• Elektronikon® control system
• Safety valves

Drive arrangement

On ARR E, the motor is flanged to the gear casing by means of a coupling housing. The motor/gear casing
unit is supported on the frame by vibration dampers.

On ARR 1, the motor is mounted on a separate subframe. The subframe and gear casing are supported on
the frame by vibration dampers.

Elektronikon control system

The compressor is controlled by an electronic regulator which:

• Controls the operation of the compressor
• Reduces the power consumption
• Warns the operator in case of an abnormal operating condition
• Protects the compressor
• Monitors components subject to service
• If activated, the regulator can automatically restart the compressor after voltage failure

Optional equipment

Following equipment is available as an option:

Full-Feature

The compressor is additionally provided with an IMD adsoption dryer. The dryer is integrated in the
bodywork and removes moisture from the compressed air.

Connections

This compressor can be provided on the compressed air outlet and water pipes with:

ANSI flanges

DIN flanges

DIN f DIN to JIS adapter flanges

Separate air intake

This compressor is prepared to install separate ducting for cooling air flow and compressed air flow.

Motor temperature protection

Temperature sensors (PT1000) are embedded in the drive motor to warn the operator if the temperature
becomes too high and to shut down the compressor, thereby protecting the motor from overheating.

Motor bearing temperature protection

Temperature sensors (PT1000) are embedded in the drive motor to warn the operator if the temperature of
the bearings becomes too high and to shut down the compressor, thereby protecting the motor bearings
from overheating.

Instruction book

2920 1815 04

17

Содержание ZR 110









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды