Atlas Copco ZR 110, Инструкция

Страница: 165 / 328

Main chart settings
Chart ranges and bands can be modified. This can cause the current value to be out of
range and can thus cause the absence of a visible curve in the graph.
The main chart settings menu allows to adjust the scale and curves on the graph. To modify these settings,
proceed as follows:
• Select the Main chart settings icon as described above and push the Enter button (1). Following
screen appears:
Text on figure
(1) Main chart
(2) Main chart signal
(3) Chart range
(4) Minimum
(5) Maximum
(6) Chart band
(7) Low
(8) High
(9) Off
The screen shows the main chart signal, the current chart range and band settings. To modify these settings,
proceed as follows:
Push the Enter key, select chart range or chart band as desired and confirm.
Modifying the chart range
Select the chart range as described above and proceed as follows:
• Push the Enter key; the minimum setting becomes highlighted. Push the Enter key to modify the
minimum setting or use the arrow down key to modify the maximum setting.
• Push the Enter key to confirm the modification.
Modifying the chart band
Select the chart band as described above and proceed as follows:
Instruction book
2920 1815 04 163