Atlas Copco DYNAPAC Svedala Demag DF 115 C, Руководство по эксплуатации и техническому обслуживанию

Страница: 92 / 236

D 3.1 12
D_3
.1_0
1_G
B.
fm
1
2
-1
6
Central lubrication unit (
o
) (100)
The central lubrication unit turns on in
automatic mode when the drive engine
starts.
- Pumping time: 12 min
- Duration of the break: 2 h
m
It is prohibited to change the factory-set
durations of pumping and break without
consulting the technical customer serv-
ice!
A
Changing the duration of lubrication and
breaks may be necessary when placing
mineral or cement bound material mix.
Manual start of lubrication (pumping
time):
- Remove the cover lid (a).
- Keep the starting button (b) depressed for at least 2 sec.
- Replace the cover lid (a).
A
Observe the instructions of chapter „Maintenance“!
Track cleaner (
o
) (101)
Movable track cleaners (a) are fitted be-
fore the two front crawler tracks, which
divert the small obstacles to the side.
A
The track cleaners may be in folded
down position only while paving.
Tilting of the track cleaner:
- Remove the safety pin (b) and the bol-
ster.
- Set the track cleaner (a) to the re-
quired position and lock again with the
bolster and the safety pin.
Lincoln3.jpg/Lincoln9.jpg
a
b
Rockdeflec.eps
a
b