Atlas Copco DYNAPAC Svedala Demag DF 115 C, Руководство по эксплуатации и техническому обслуживанию

Страница: 63 / 236

D 1.4 5
D_1
.4_0
1_G
B.
fm
5
-22
Item Designation Brief description
5 Starter
Starting is only possible when the drive lever is in the neutral
position. All emergency stop buttons (on the operating panel
and the remote controls) must be pulled up.
6
Machine drive
fast/slow Hare: Travelling speed
Tortoise: Working speed for laying
7 Horn
Use it as a sound alarm in case of imminent danger and be-
fore starting!
8
Preselector of trac-
tion drive
This sets the speed, which the machine must achieve with the
full swing of the drive lever.
A
The scale approximately corresponds to the speed in
m/min (when laying).
9
Drive lever
(forward)
For switching on the paver finisher functions and for continu-
ously regulating the traction speed – forward or reverse.
Zero position: starting is possible; engine at idling speed; no
traction drive; secured against inadvertent starting.
For turning out, pull up the ring (9a).
Depending on the position of the drive lever, the following
functions can be activated:
- position 1: the engine runs at the preset speed
(see Engine speed setting).
- position 2: feeder and auger On.
- position 3: screed movement (tamper/vibrator) turned on;
traction drive engaged; increase speed until im-
pact.
Use the preselector to set the maximum speed.
10 Not used
11 Not used