♦
Screw the connecting fittings
»P«
and
»T«
and
both
»Rotate«
connecting fittings into the rotating
mechanism.
♦
Screw the elbow joints into valve block
connections
»P«
and
»T«
.
♦
Lay the outer housing on its side.
P
T
♦
Screw the connecting fittings into oil distributor
connections
»P«
and
»T«
.
♦
Connect oil distributor and valve block connections
»P«
together with a hydraulic hose.
♦
Connect oil distributor and valve block connections
»T«
together with a hydraulic hose.
♦
Install the outer housing (see the chapter
Replacing worn rubber isolators
).
Manufacturing the adapter
plate
Construction Tools GmbH also supplies base plates
to manufacture adapter plates alternatively to the
adapter plates supplied.
NOTICE
Adapter plate cracking
The adapter plate may crack if it is not designed for
the high load.
►
Take not only the weight of the hydraulic
attachment but also the crowd force of the carrier,
possible vibration etc. into account when
dimensioning the adapter plate.
►
Ensure that the design conforms to the state of
the art.
►
Have the web plates welded to the adapter plate
base plate by a qualified welding specialist.
The base plate is made of the material
EN10025-S355 J2G3.
♦
Have the web plates designed and manufactured
or procure web plates to fit your carrier.
♦
Ensure that the web plates are welded to the base
plate side marked "TOP".
The adapter plate must not strike in any position
during operation of the hydraulic attachment.
Construction Tools GmbH does not design,
manufacture or sell web plates for adapter plates.
Installing the adapter plate
NOTICE
The adapter plate can come loose
The adapter plate can come loose if the fastening
screws are not designed for local high loads.
►
Only use the Allen screws of strength category
8.8 and the pairs of lock washers included in the
delivery to attach the adapter plate or the base
plate.
WARNING Hands and fingers being cut off
or hurt
Bores and surfaces can act like a pair of scissors
and cut off or hurt parts of your body.
►
Never use your fingers to check bores or fitting
surfaces.
♦
Place the hydraulic compactor within the range of
the carrier.
♦
Apply anti-seize compound to the Allen screw
threads (A) before inserting them.
21
© 2014 Construction Tools EOOD | No. 3390 5121 01 | 2014-11-19
Original instructions
INSTALLATION
HC 150, 350, 450, 850, 1050, 1055
