background image

Содержание KD-100

Страница 1: ...ositioned 0 5 Center line height of drain line must not exceed center line height of disposer discharge opening 0 6 M oun mg screws and spout screws properly tightened to prevent leaks t 0 7 Compliance with all aspects of local plumbing code ELECTRICAL CONNECTION 0 1 Properly fused 115 volt 60 hertz branch circuit of 15 ampere capacity 0 2 Disposer properly grounded before operating 0 3 All connec...

Страница 2: ... not permit use of the seal a permanently pliable sealing compound may be used THE SINK FLANGE MUST BE LEVEL BEFORE MOUNTING DISPOSER 6 Assemble the second sink flange seal 3 pressure washer 4 and support plate 5 onto the sink flange and lock in place with snap ring 6 Tighten the three jack screws 13 EVENLY against pressure washer 4 to secure the mounting assembly to the sink DISHWASHERCONNECTION ...

Страница 3: ...r better alignment 3 Connect the dishwasher drain hose to the disposer inlet 13 with a hose clamp where applicable 4 Check to assure that the grinding chamber is clean of any foreign objects and tire flywheel is free to rotate Place the cover in position and fill the sink at least three inches deep Remove the cover and as the water drains chech all con nections for leaks TYPICAL INSTALLATIONS Heig...

Страница 4: ... connections GROUNDING INSTRUCTIONS Cord Connected Units This appliance must be grounded In the event of a malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This appliance is equipped with a cord having an equipment gloundmg conductor and a grounding plug The plug must be plugged into an appropriate outlet that is prope...

Отзывы: