16
Maintenance - Servicing
To maintain your device performance, it is necessary to remove dust
about twice a year.
Before cleaning your device, disconnect the power supply.
Do not use liquid or aerosol cleaners. Use a soft cloth, possibly slightly moistened.
Annual maintenance of the condensate tray is necessary to avoid any risk of clogging and therefore any
potential leakage (
should be performed during the maintenance visit of the heat pump
).
When filter maintenance is required,
(
Filter Maintenance
) is displayed on the screen. You need to clean it
by following the procedure described below.
Put your device in standby (
press and
hold on
).
Pull the filter located beneath the device.
Clean it with a dry cloth or a vacuum
cleaner.
Put it back in beneath the device.
Clean also the grid located beneath the
device.
Turn your device back on (
press and
hold on
).
To turn the light indicator off, rapidly
press on
.
turns off. The screen returns to
the previous display.
Sustainable Development
The device has been designed to limit the number of materials and be easily recycled.
This device is identified by this symbol. It means that all electrical and electronic products must
absolutely be separated from household waste.
A dedicated collection system for this type of products is set up in European Union (*) countries,
Norway, Iceland and Liechtenstein.
Do not disassemble this product yourself. This can have adverse effects on your health and the environment.
Reprocessing coolant, oil and other parts must be done by a qualified installer in accordance with current
national and social regulations.
Recycling of this device must be supported by a specialized service and shall not be disposed of with household
waste, cumbersome waste or on a landfill site.
Please contact your installer or local representative for more information.
* Depending on national regulations of each member state.
