11
Operating the device
Your device is connected to a heating generator such as a heat pump type which, depending on the setting,
will allow you to heat or cool down your house. If your heat pump is set on
mode, your device will
operate in Heating mode. If your heat pump is set on the mode, your device will operate in Cooling mode.
The heating and cooling needs are provided by the fan built in the unit. Auxiliary heating may be obtained
through the
heating front
.
For more comfort and energy saving, your device has a control box with digital display. It will allow you to set
all the functions of the device.
When the unit first starts heating, a slight odor may occur. It corresponds to the removal of possible wastes
associated with the manufacture of the unit.
Control box
Switch
An On/Off switch is located on the right side of the device.
Use the switch only for a prolonged
shutdown
(
Powering off the unit for maintenance for example.)
Set the switch on “I” to power the device on.
Heating or cooling mode light indicators
You can view the heat pump operation mode:
Cold is provided to the device through the heat pump.
Heat is provided to the device through the heat pump.
Using the device
Make sure the switch is on
To turn the device On, press
and hold on the
button
for at least 3 seconds.
The device displays the comfort temperature.
When first turned on, the device is set at 19°C for
heating.
If your heat pump is working
19°C is
displayed.
If your heat pump is working,
26°C is
displayed.
A
-
Heating or cooling operation LEDs
B
-
Comfort, Eco and Quiet modes LEDs
C-
Power on / Standby / Mode Change
D
-
Temperature setting / Control lockout
E
-
Heat indicator of the heating front
F
-
Required temperature display
Before any use of the control box, it is in the standby mode, which means it is turned off.
For any future use, push any button to turn on the screen.
TURNING THE DEVICE ON
I
