Installation and Operation Manual
Document #9620-20-b-mc-16 base tool changer-07
Pinnacle Park
•
1031 Goodworth Drive
•
Apex, NC 27539
•
Tel: 919.772.0115
•
Fax: 919.772.8259
•
www.ati-ia.com
•
Email: [email protected]
B - 3
1.2 Tool Plate
The hardened steel body of the Tool plate has one flat side for the mounting of optional
modules. The Tool plate is equipped with four pass through air ports, 1/8” NPT port are
provided in the body for the pneumatic connections.
Figure 1.2 —Tool Plate
1.3 Optional Modules
There is one flat available for the mounting of the optional modules for support of various
utility pass-through, such as electrical signals.
For assistance in choosing the right modules for your particular application, visit our website
to see what is available or contact an ATI Sales Representative directly.
The optional modules are mounted to the Master or Tool Plate using a common side
mounting feature. Only (2) socket head cap screws need to be unscrewed in order to remove
the module from the Master/Tool Plate.
Figure 1.3 —Optional Modules
2. Installation
