AtGames LEGENDS PINBALL, Инструкция по эксплуатации

Страница: 11 / 25

9
Disconnect EDP cable
A
B
Carefully grip the cable with one hand in the
middle, where the
Push to lock text is displayed.
With the other hand, using your thumb and
IRUHȴQJHUJUDVSWKHPHWDOVOLGHUVLQGLFDWHGDV
A in the picture. Carefully slide these grips in an
UPWARD position until they no longer move.
You should be able to slide Cable A up and out of
the connector.
Again, carefully grip the cable with one hand in
the middle, where the
Push to lock text is
displayed.
With the other hand, using your thumb and
IRUHȴQJHUJUDVSWKHPHWDOVOLGHUVLQGLFDWHGDV
A in the picture. Carefully slide these grips in a
DOWNWARD position until they no longer move.
You should be able to slide Cable B down and out
of the connector.
Keep the connector somewhere safe for future
use if needed.
A
DISCONNECT EDP CABLE
BETWEEN MAINBOARD AND
BACKGLASS SCREEN
B
C
D
E
F
G
CABLE IS DISCONNECTED
After the cable is disconnected, your cable
should look similar to this image.
A
You have completed the Early Production
installation method, proceed to page 13.
B