AtGames LEGENDS PINBALL, Инструкция по эксплуатации

Страница: 5 / 25

Components included in the box
3
D
B
Video Input Backglass Switchboard (VIBS).
FPC/EDP cable.
Button housing: Use this button to switch the video stream on the Legends
Pinball backglass. This button will toggle between the backglass video feed
from the native pinball backglass on the Legends Pinball and the backglass
video feed from your PC backglass feed when VIBS is properly connected. This
EXWWRQFDQEHPRXQWHGDQ\ZKHUH\RXȴQGFRQYHQLHQW
Microswitch: Connect the wires (E) to this microswitch and then connect the
microswitch to the button housing.
Button wiring: When installation of VIBS is complete, connect the end of the
wiring with the metal clips to the microswitch (D). Connect the other end of
the wiring (2 pin white connector) to the white connector on the VIBS board
(See connector (C) in the picture on the following page).
A
B
C
D
E
A
C
E