ATEN VM6404H, Руководство пользователя

Страница: 42 / 107

VM6404H User Manual
30
Profile Pushbutton
The
PROFILE
pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see
Profile List
,
page 35).
If a Profile is in use, its profile number (P1–P8) is shown on the lower right
corner of the LCD display.
The Profile pushbutton functions as follows:
Š Press the Profile pushbutton for 1–2 seconds to cycle between profiles
stored in the GUI’s Profile List (from 1 up to 8, depending on how many
are added to the list)
Š Alternatively, after pressing the Profile pushbutton (lights), use the Input/
Output pushbuttons to switch to a specific profile (from P1 to P16 only).
Note that:
Š
Input
ports
1-4
correspond to Profile
P1
to
P4
Š
Output
ports
1-4
correspond to Profile
P5
to
P8
(where Output Port
1=Profile 5, Output Port 2=Profile 6...)
The selected pushbutton lights steady, and the VM6404H immediately
applies the port connections configured in the selected profile.
Š When the Profile pushbutton is pressed for 3 seconds or more, the LCD
directs to the Save to a Profile page (see
Save to a Profile
, page 28)
Š Press the
Cancel
pushbutton to exit
Note:
If there are no profiles configured on the VM6404H device, an error
message “
No Profile List defined. Profile List can be edited via the Web
GUI
” is displayed when the Profile pushbutton is pressed.
A Profile’s port connections can be edited using the front panel pushbuttons
(see
Port Switching
, page 15) or from the
Connections
page of the Browser
GUI (see
Connection Profiles
, page 41). Additionally, the Profile List can be
configured via the Profile page of the Browser GUI (see
Profile List
, page 35).
INPUT 1 2 3 4
OUTPUT 1 2 3 4
P1