ATEN VM6404H, Руководство пользователя

Страница: 35 / 107

Chapter 3. Front Panel Configuration
23
2. Press pushbuttons 1–4 to make your selection.
EDID Mode options are:
3. Press
Menu
to return to the Menu page.
4. Press
Cancel
to go back a level, return to the initial screen, or exit.
CEC
To configure the CEC setting, do the following:
1. From the Operation Mode page, press pushbutton
2
:
2. Press pushbuttons 1–4 to enable (
ON
) or disable (
NA
) the CEC feature for
the output port. If the port does not support CEC, an
NA
is shown.
Note:
The default CEC setting is NA.
3. Press
Menu
to return to the Menu page.
4. Press
Cancel
to go back a level, return to the initial screen, or exit.
EDID Option Description
1:
Port1 The EDID from port1 is passed to all video sources.
2:
Default The default EDID is passed to all video sources.
3:
Remix Uses the EDID of each connected display according to its
connection when the VM6404H is first powered on, or
immediately after pressing 3 to select the Remix option.
4:
Customized Automatically retrieves and saves the EDID settings of a
connected monitor/display device to an input source port. This
can be configured using the Browser GUI. See
Customized
EDID Settings
, page 64.
1: Port 1 3: Remix
2: Default (In use) 4: Customized
1: EDID Mode
2: CEC
: Next
OUTPUT 1 2 3 4
NA ON ON NA