ATEN VM6404H, Руководство пользователя

Страница: 39 / 107

Chapter 3. Front Panel Configuration
27
Change Password
1. To change the password for accessing the unit, press pushbutton
2
.
2. In the Old Password field, the cursor flashes at the first digit. Enter the old
password (see
Enter Password
, page 14). If the old password is entered
correctly, you can proceed to the next step.
Note:
If you entered an incorrect password, an error message appears and the
cursor goes back to the first digit (flashing). The Incorrect Password
message clears as soon as a new digit is entered.
3. In the New Password field, the cursor flashes at the first digit. Enter the
new password using the front panel number pushbuttons (1111–4444).
4. Re-enter the new password in the following screen. The new password is
applied by the VM6404H immediately.
If the password you entered does not match the one entered in the previous
screen, an error message appears. Enter the new password correctly.
5. Press
Menu
to return to the Menu page.
6. Press
Cancel
to go back a level, return to the initial screen, or exit.
1. Password: Disable
2. Change Password
Old Password: * * * *
Incorrect Password
New Password: * * * *
Re-enter New Password: * * * *