ATEN VM6404H, Руководство пользователя

Страница: 87 / 107

75
Chapter 5
RS-232 Commands
Serial Control Protocol Commands
The VM6404H’s built-in bi-directional RS-232 serial interface allows system
control through a high-end controller or PC.
Configuring the Serial Port
The controller’s serial port should be configured as follows:
Verification
After entering a command, a verification message appears at the end of the
command line as follows:
Š
Command OK
- indicates that the command is correct and successfully
performed by the switch
Š
Command incorrect
- indicates that the command has the wrong format
and/or values.
Baud Rate 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None