Chapter 5. RS-232 Commands
95
Echo Command
The Echo function updates the RS232 controller when operations are made via
the front panel pushbuttons, web browser, or telnet. The changes echo back to
the RS232 controller to keep the settings in sync with the device.
The formula for the Echo command is as follows:
C C [Enter]
1. For example, to enable the echo feature, type:
echo on [Enter]
The following tables show the possible values for the
Echo
command
:
Note:
Each command string can be separated with a space.
The following table lists the available Echo commands:
Command
Description
echo
Echo command
Control
Description
on
Turns Echo function on
off
Turns Echo function off (default)
Command
Control
Enter
Description
echo
on
[Enter]
Turn on Echo function
echo
off
[Enter]
Turn off Echo function
Содержание VM3404H
