ATEN VM3404H, Руководство пользователя

Страница: 45 / 118

Chapter 3. Front Panel Configuration
35
Save to a Profile
The switch allows users to store up to 8 (VM3404H) or 18 (VM3909H )
(numbered P1–P18) different connection profiles that can be saved and
recalled later.
The active Input-to-Output port connections on the LCD Main Screen is the
configuration saved to a profile. When a user loads a profile, the change is
immediate and the profile number is shown on the lower right corner of the
LCD screen.
To save a profile once the desired port connections are set, do the following:
1. Press the Menu pushbutton to access the Menu page, then Next to
navigate to the next pages. Press pushbutton 1 to open the select Save to a
Profile page.
2. On the page that opens, you are asked to give the profile a number. Use the
front panel number pushbuttons to select a profile number into which you
want to save the configuration.
VM3404H : Options are P1–P8 (when saving a profile via the LCD),
where:

Input port pushbuttons 1–4 correspond to Profile P1 to P4

Output port pushbuttons 1–4 correspond to Profile P5 to P8
VM3909H : Options are P1–P18 (when saving a profile via the LCD),
where:

Input port pushbuttons 1–9 correspond to Profile P1 to P9

Output port pushbuttons 10–18 correspond to Profile P10 to P18
3. Press Enter to store the configuration – the LCD shows Profile Saved.
4. Press Menu to return to the Menu page,
5. Press Cancel to return to the previous step without saving.
Note: Access the Save to a Profile page quickly by pressing the Profile
pushbutton for longer than 3 seconds.