VM0808T User Manual
24
2. Use the Up / Down navigation pushbuttons to cycle through the options.
Baud rate options are 9600, 19200, 38400, and 115200.
3. Press ENTER to confirm the baud rate.
Note:
The default baud rate is 19200.
Serial Port Mode
The VM0808T supports RS-232, RS-422, and RS-485. To set the VM0808T’s
serial port , do the following:
1. Select Serial Port Mode from the Set Serial Port submenu. The cursor
flashes on the entry:
2. Use the Up / Down navigation pushbuttons to cycle through the options.
Mode options are RS-232, RS-422, RS-485, and bypass.
3. Press ENTER to confirm the Serial Port Mode.
Note:
1. The default serial port mode is RS-232.
2. If
bypass
is selected, the female RS-232 port connected to the
local controller (PC) bypasses signals to the Receiver unit, and
RS-232 signals from the Transmitter unit pass to the male RS-232
port. Select
bypass
if you are using the male RS-232 port to
connect a serial device, such as a touchscreen or barcode scanner.
Default Serial Settings
To use / not use the VM0808T’s Default Serial Settings, do the following:
1. Select Default Serial Settings from the Set IP Port submenu. The cursor
flashes on the entry.
2. Select Yes or No.
MENU
AUDIO
ESC
ENTER
Serial Port Mode: RS232
Defaul Serial Setting: No
