ATEN VM0808T Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 64

background image

VM0808T User Manual

ii

FCC, CE Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

FCC Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

CE Warning: This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.

RoHS

This product is RoHS compliant.

Safety

This product has been classified as Information Technology Equipment.

SJ/T 11364-2006

The following contains information that relates to China.

«
1
2
3
4
...
»

Содержание VM0808T

































































Отзывы:

Нет отзывов

Похожие инструкции для VM0808T

Бренд: Omega Engineering Страницы: 3

Бренд: LAUMAS Страницы: 40

Бренд: Intermatic Страницы: 1

Бренд: Campbell Страницы: 10

Бренд: Velleman Страницы: 5

Бренд: Eaton Страницы: 120

Бренд: Extron electronics Страницы: 3

Бренд: QSFPTEK Страницы: 12

DH-PFS3206-4P-120

Бренд: Dahua Страницы: 19

Бренд: Origin Instruments Страницы: 6

Бренд: Cabletron Systems Страницы: 105

IMI Sensors 691A80

Бренд: PCB Piezotronics Страницы: 15

Бренд: Lindy Страницы: 6

Бренд: InvoTek Страницы: 4

GTB-MHDMI1.3-442

Бренд: Gefen Страницы: 29

Бренд: Netis Страницы: 9

Бренд: Hama Страницы: 36

Бренд: NightStick Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды