ATEN SN0108A, Руководство пользователя

Страница: 26 / 172

Serial Console Server User Manual
10
4 Reset Switch Note: This switch is recessed and must be pushed with a small
object such as the end of a paper clip, or a ballpoint pen.
Š
Pressing and releasing this switch when the unit is running
performs a system reset.
Š
Pressing and holding this switch in for more than three
seconds when the unit is running resets its configuration to
the factory default settings.
Note: This does not clear User Account information.
See
Clear Login Information , page 151, for
information on clearing user account information.
Š
Pressing and holding this switch while powering on the
switch returns the unit to its factory default firmware level,
rather than the firmware version that the switch has been
upgraded to. This allows you to recover from a f ailed
firmware upgrade and gives you the opportunity to try
upgrading the firmware again.
Note: This operation should only be performed in the event
of a firmware upgrade failure that results in the device
becoming inoperable.
5 PON Port This connector is provided for a Power over the Net™ (PON)
unit which allows servers attached to the Serial Console Server
to be booted remotely. See
Serial Console Server Installation ,
page 27, step 5 for installation details.
Contact your dealer for more information regarding PON units.
6 Modem Port For dial in connection should the unit be unavailable over the
network. See
Serial Console Server Installation , page 27, step
6 for installation details.
7 Local Console
Port This RJ45 port allows for local administration and access
through a serial terminal connection to a computer. An SA0141
(DTE to DTE) adapter (included in the package) is required for
this connection.
8 Laptop USB
Console Port This mini-USB port allows a PC or laptop to be connected for
local access and control. Connect to a PC or laptop to
automatically launch a terminal emulator to access the SN text
menu.
9 USB Ports These three Type A female USB ports can be used to connect
USB devices, such as USB storage devices (pen drive / hard
drive), USB hubs and USB LAN cards.
No. Component Description