ATEN SN0108A, Руководство пользователя

Страница: 106 / 172

Serial Console Server User Manual
90
4. Make your permission settings for each port according to the information
provided below:
5. When you have finished making your choices, click Save .
6. In the confirmation popup that appears, click OK .
Note: In any of the columns, you can use Shift-Click or Ctrl-Click to select a
group of ports to configure. Clicking to cycle through the choices on
any one of the selected ports causes all of them to cycle in unison.
Name: Each port accessible to the user is listed under the Names
column.
Access: The Access column is where device access rights are set. Click
the radio buttons in the rows that corresponds your choices. The
meanings are described, below:
Full
Access The user can view the remote screen and can perform
operations on the remote server from his keyboard.
View
Only The user can only view the remote screen; he cannot
perform any operations on it.
No
Access No access rights - the Port will not show up on the
User's list on the Main Screen.
Config: The Config column is where a user’s permission to make changes
to a port’s configuration settings are permitted/restricted. A check
mark (
√
) indicates that the user has permission to make
changes to the port’s configuration settings; an empty box means
that the user is denied permission to make configuration changes.
Power Supply: The Power Supply column permits/restricts the configuration and
power operation of ports that have Power Over the Net™ devices
connected to them. A check mark (
√
) indicates that the user has
permission; an empty box means that the user does not have
permission.