ATEN CS1708i, Руководство пользователя

Страница: 61 / 216

4. OSD Operation
45
Hotkey Configuration Operations
Keyboard / Mouse Reset
If the keyboard or mouse ceases to function on the computer connected to the
currently selected port, you can perform a keyboard / mouse reset on the
computer. This function is essentially the same as unplugging and replugging
the keyboard and mouse on the target computer. To perform a computer
keyboard / mouse reset, key in the following hotkey combination:
1. Invoke Hotkey Mode (see page 41).
2. Press [F5].
After you press [F5] you automatically exit
Hotkey
mode and regain keyboard
and mouse control on the computer connected to the KVM port. If you fail to
regain keyboard / mouse control on the computer after pressing [F5], perform
a console keyboard and mouse reset. For more information see
Port Selection
Switches
, page 9.
Hotkey Beeper Control
The Beeper (see
ACTIVATE BEEPER
, page 35) can be hotkey toggled On and
Off. When the beeper is set to On, the CS1708i / CS1716i beeps when it
switches ports. To toggle the Beeper, do the following:
1. Invoke Hotkey Mode (see page 41).
2. Press [B]
After you press B , the Beeper toggles On or Off. The Command Line displays
Beeper On
or
Beeper Off
for one second; then the message disappears and you
automatically exit Hotkey Mode.
Toggling the Hotkey Invocation Keys
The Hotkey invocation keys (see
HOTKEY
, page 33) can be toggled between
the default set ([Num Lock] + [-]), and an alternate set ([Ctrl] + [F12]). To
toggle the invocation keys, do the following:
1. Invoke Hotkey Mode (see page 41).
2. Press [H] .
After you press [H], the command line displays
HOTKEY HAS BEEN
CHANGED
for one second; then the message disappears and you
automatically exit
Hotkey
mode.