ATEN CS1708i, Руководство пользователя

Страница: 163 / 216

Chapter 11. Maintenance
147
System Operation
The
System Operation
page lets you restore certain configuration changes that
were made to the CS1708i / CS1716i back to their original factory default
values.
]
The functions performed on this page are as follows:
Clear Port Names:
Clicking this button removes names that have been assigned to the ports
Reset Default Values:
Clicking this button undoes all Customization page changes that have been
made to the CS1708i / CS1716i (except for the Port Names), as well as the
Network Transfer Rate (on the Network page), and returns the parameters to
the original factory default settings.
Apply:
Clicking this button makes the CS1708i / CS1716i reset itself and implement
all the new settings when you log out. (Following the reset, wait approximately
30 to 60 seconds before logging back in.)
Note: Even though the changed IP settings are ignored, they still remain in the
network settings fields. Which means that the next time you open this
page the
Reset on exit
checkbox will automatically be enabled, and
when the switch resets, the new IP settings that you thought you
discarded will become the ones used by the switch. To avoid this
problem, you should go back to the network settings page and be sure
that the IP settings that appear in the fields are the ones you want to use.