ATEN CS1708i, Руководство пользователя

Страница: 141 / 216

Chapter 9. Device Management
125
To allow authentication and authorization for the CS1708i / CS1716i via
LDAP / LDAPS, refer to the information in the table, below:
On the LDAP / LDAPS server, Users can be authenticated with the following
method:
 With MS Active Directory schema.
CC Management
To allow authorization for the CS1708i / CS1716i through a CC (Control
Center) server, check
Enable
and fill in the CC Server’s IP address and Service
port (default: 8000) in the appropriate fields. You can use the IPv4 address, the
IPv6 address or the domain name in the
CC Server IP
field.
Item Action
Enable Put a check in the
Enable
checkbox to allow LDAP / LDAPS
authentication and authorization.
Type Click a radio button to specify whether to use LDAP or LDAPS.
LDAP Server IP
and Port Fill in the IP address and port number for the LDAP or LDAPS
server.

You can use the IPv4 address, the IPv6 address or the
domain name in the
LDAP Server
field.

For LDAP, the default port number is 389; for LDAPS, the
default port number is 636.
Timeout Set the time in seconds that the CS1708i / CS1716i waits for an
LDAP or LDAPS server reply before it times out.
Admin DN Consult the LDAP / LDAPS administrator to ascertain the
appropriate entry for this field. For example, the entry might
look like this:
ou=cs1708i,dc=aten,dc=com
Admin Name Key in the LDAP administrator’s username.
Password Key in the LDAP administrator’s password.
Search DN Set the distinguished name of the search base. This is the
domain name where the search starts for user names.