CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 84
kyrion2Preset (OID 1.3.6.1.4.1.27338.4.13)
This node is related to preset management. It lists all the configuration slots stored in the unit, and can also be used to
edit the slot name. Please note that this node can neither be used to view nor edit configuration slot content, but only
its name. Viewing/editing the content can be performed through node kyrion2Channel (OID 1.3.6.1.4.1.27338.4.3).
kyrion2Licenses (OID 1.3.6.1.4.1.27338.4.14)
List all the possible licenses and their state (present or not) on the unit.
kyrion2Remuxer (OID 1.3.6.1.4.1.27338.4.15)
This node is targeted at remuxer management, and as kyrion2Channel is organized in three sub-nodes:
• kyrion2RemuxerCommand (OID 1.3.6.1.4.1.27338.4.15.2) allows to load/save a preset for a remuxer from one
of the configuration slot. This equivalent to the Web GUI tab "load/save" described in the Remuxer Tab. It also
allows you to start or stop the remuxer as Web GUI buttons described in Section 4.3.3, “ Status Tab ”.
• kyrion2RemuxerStatus (OID 1.3.6.1.4.1.27338.4.15.3) is used to retrieve information on the remuxing itself.
• kyrion2RemuxerCfg (OID 1.3.6.1.4.1.27338.4.15.4) is used to modify the running remuxer configuration. For
instance, this is the appropriate node for setting the input TS source, the TS bitrate or the outputs.