CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 82
A.2.1. Main nodes
CM5000 MIB is organized in fifteen nodes which description is hereinafter given.
.
|-- kyrion2Conformance (OID 1.3.6.1.4.1.27338.4.1)
|-- kyrion2Unit (OID 1.3.6.1.4.1.27338.4.2)
|-- kyrion2Channel (OID 1.3.6.1.4.1.27338.4.3)
|-- kyrion2Software (OID 1.3.6.1.4.1.27338.4.4)
|-- kyrion2Hardware (OID 1.3.6.1.4.1.27338.4.5)
|-- kyrion2Network (OID 1.3.6.1.4.1.27338.4.6)
|-- kyrion2Biss (OID 1.3.6.1.4.1.27338.4.7)
|-- kyrion2Time (OID 1.3.6.1.4.1.27338.4.8)
|-- kyrion2Snmp (OID 1.3.6.1.4.1.27338.4.9)
|-- kyrion2Web (OID 1.3.6.1.4.1.27338.4.10)
|-- kyrion2Event (OID 1.3.6.1.4.1.27338.4.11)
|-- kyrion2StatMux (OID 1.3.6.1.4.1.27338.4.12)
|-- kyrion2Preset (OID 1.3.6.1.4.1.27338.4.13)
|-- kyrion2License (OID 1.3.6.1.4.1.27338.4.14)
`-- kyrion2Remuxer (OID 1.3.6.1.4.1.27338.4.15)
kyrion2Conformance (OID 1.3.6.1.4.1.27338.4.1)
The CM5000 only exports full compliance group. Please refer to RFC 2580 for more information on that topic.
kyrion2Unit (OID 1.3.6.1.4.1.27338.4.2)
This node contains information related to the physical unit, such as unit Serial Number (RO), Name (RW) and Model
(RO).
Note
The "model" node can be used to identify a unit in an unit farm, by following the process described in
Section A.3.1.1, “ Identification process ”.
kyrion2Channel (OID 1.3.6.1.4.1.27338.4.3)
This node is targeted at channel management, and is organized in three sub-nodes:
• kyrion2ChannelCommand (OID 1.3.6.1.4.1.27338.4.3.1) allows to load/save a preset for a channel from/to one of
the configuration slots. This is equivalent to the "load/save" Web GUI buttons described inSection 4.3.4, “ Channel
Tab ”. It also allows you to start or stop a channel as the Web GUI buttons described in Section 4.3.3, “ Status Tab ”.
• kyrion2ChannelStatus (OID 1.3.6.1.4.1.27338.4.3.2) is used to retrieve information on the encoding itself which
cannot be easily estimated from or given by the configuration, such as TS current bitrate or encoded input video
format. As Web GUI channel summary described in Section 4.3.3, “ Status Tab ”.
• kyrion2ChannelCfg (OID 1.3.6.1.4.1.27338.4.3.3) is used to modify the running configuration. For instance, this
is the appropriate node for setting the video codec type, the PIDs or the audio mapping.