CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 73
-----END PUBLIC KEY-----"; IRD-B PKCS8
5.3.9. System - Alarms
Table 5.49. Alarms names
Alarm name
Active condition (when applicable)
Audio Signal Inactive
The audio signal contains silence for longer than
10s (per audio track that are not pass-through)
Audio Signal Incompatible
The input contains audio data that are not in the expected format (per audio track)
Audio Signal Missing
The input does not contain audio data (per audio track)
Audio Decoding Failure
The input does not contain valid Dolby-E da-
ta (per audio track that decodes the Dolby E)
Audio Signal Invalid Dolby E
The input does not contain valid or aligned Dolby-E da-
ta (per audio track that does a Dolby E pass-though)
Data Signal Missing
The SDI input does not contain the requested data (per data track)
Output Network Link Down
An ethernet link used as an output is down (per
ethernet link used by at least one IP output)
Output Zixi Con-
nection Failure
The connection to the Zixi target cannot be established (per IP output using Zixi)
Output SRT Con-
nection Failure
The connection to the SRT target cannot be established (per IP output using SRT)
Redundancy Failure
The 1+1 redundancy cannot work due to hardware, ver-
sion, license, configuration or connection issues (per channel)
Output muted
The ouput is muted (no TS) due to video or audio 'mute' emulation (per output)
TS Input Signal Missing
The TS input signal is missing (per channel)
Video Signal Inactive
Reserved for future use
Video Signal Incompatible
The SDI input signal is not in the expected format (per channel)
Video Signal Missing
The SDI input signal is missing (per channel)
Clock Signal Incompatible
The genlock signal format is not compati-
ble with the video signal format (per channel)
Clock Signal Missing
The genlock signal is missing (per channel)
Modulator Exter-
nal Clock Missing
The 10Mhz reference clock signal is missing
Modulator Hardware Failure
The modulator hardware is failing
Modulator Mute
The modulator TS output is muted (no RF)
Modulator TS In-
put Signal Missing
The modulator TS input signal is missing
System Ethernet Link Down
An ethernet link is down (per ethernet interface)
System Fan
A fan is failing (per fan)
System Hardware
A non specified hardware component is failing
System Hardware Extension
A hardware board extension is failing
System Overheat
A hardware component is overheating