Atel IWE1200A-G, Руководство пользователя

Страница: 21 / 87

the behavior of the DHCP client of the gateway. In Auto mode, you don’t have to worry about the
DHCP process; the device takes care of everything. In Manual mode, there are two buttons on the
Start page for you to manually release an obtained IP address ( Release ) and re-obtain a new one from
a DHCP server ( Renew ).
2.4.3.3. Gateway with a Static-IP DSL/Cable Connection
Fig. 8. TCP/IP settings for Gateway with a Static-IP DSL/Cable Connection mode.
If the gateway was set to be in Gateway with a Static-IP DSL/Cable Connection mode, two IP ad-
dresses are needed—one for the Ethernet LAN interface and the other for the WAN interface. The
LAN IP address must be set manually to a
private IP address , say 192.168.0.xxx . The default LAN IP
address is 192.168.0.1 and the default subnet mask is 255.255.255.0 . In most cases, these default set-
tings need no change.
As for the WAN IP address, it must be manually set. Consult your ISP for the correct IP address ,
Default gateway , Subnet mask , Primary DNS server , and Secondary DNS server settings.
14