Atel IWE1200A-G, Руководство пользователя

Страница: 15 / 87

2. First-Time Installation and Configuration
2.1. Powering the WLAN Hotspot Access Gateway
1. Plug the power adapter to an AC socket.
2. Plug the connector of the power adapter to the power jack of the WLAN hotspot access gateway.
NOTE: This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2” or
“LPS” and output rated “5V DC, 1 A minimum” or equivalent statement.
2.2. Mounting the WLAN Hotspot Access Gateway
on a Wall
The WLAN hotspot access gateway is wall-mountable.
1. Stick the supplied sticker for wall-mounting.
2. Use a
φ
7.0mm driller to drill a 25mm-deep hole at each of the cross marks.
3. Plug in a supplied plastic conical anchor in each hole.
4. Screw a supplied screw in each plastic conical anchor for a proper depth so that the WLAN hot-
spot access gateway can be hung on the screws.
5. Hang the WLAN hotspot access gateway on the screws.
Fig. 1. Mounting the WLAN hotspot access gateway on a wall.
2.3. Preparing for Configuration
For you to configure a gateway, a managing computer with a Web browser is needed. For configura-
8