[53]
5.18.
Tool Storeroom (Lathe)
While machining the different work piece or different surfaces of the work piece, the different machine tools may be
needed. So you will need to change the machine tools. ADR10 digital coordinate readout has 1000 pcs tool
memories. By this way you don’t need to get zero point for each tool changing.
The tool must be open to use this function. To open the tool
button must be pressed 10 times to open the too.
The registration of the tools can be made by automatically or manuel. For automatic registration please press
button and “Tool” button. The memory number must be set. On the zero point of X axis “Sx” button is pressed..On
the Y axis “Sy” button is pressed accordingly.
For manuel setting of tool memory “Tool” button is pressed and “Zero” button is pressed accordingly. Then the
memory number is set and “enter”. Sx button is pressed and X axis length is entered. Sy button is pressed and Y axis
length is entered button is pressed. You can exit by
button. To make easier generally “0” is used for memory
number. For reference number of the tool dimensions “0” can be used for easy.
Example:
Tool Memory Setting First Way ( Automatically):
10 x
Y1
Y2
X1
X2
Tool1
Tool 2
To memory; 2 different tool and to set
tool1 as reference and tool2 as
selection as left drawing
10 mm
12mm
3mm
5mm
Tool 1
Tool 2