[43]
5.13.
Frame Hole Patterns (Milling)
Frame hole patterns function is used fort o make a frame which created by the holes on the determined plane of the
work piece. The edge hole numbers must be determine by the user.
To active the function move the tablet o the first hole point. Press
button and press “Sin / F2” button. You will
see “FRAME” writing on the screen. Press enter to open the function. Select the plane by the
buttons. And
press enter button. The user has 2 options here . He can choice the distance between 2 holes as “STEP” or choice
the distance between the first hole and last hole as “length”. Use
buttons for this choice. Press axis
selection buttonc and enter the lenght / step value and press enter to save. Press enter for next step. Press Sx button
to enter the angle value. Press enter value. Press
button and press Sx button again to enter the clounm number.
Press enter to save. Press Sy button to enter the line number. Enter the value and press enter to save. Press
button and see the distance value on the screen . For the first hole the value will be “0” . After drilling press
button and see the dşistance for the 2. Hole. Move the table to up to make zero the value anddrill the 2. Hole. By
. Button the next step is passed. These operations must be repeat for all holes and press
button to exit.
Example:
On XY Plane,
Column Length: 60mm
Line Length: 90mm
Angle: 30
°v
Column Number:4
Line Number: 3
To use the function with the above data;
Select “XY” plane.
1st Axis
2nd Axis
Step 1
Step 2
Lenght 1
Lenght 2
Angle
First Hole
X
First Hole
Y
90mm
60 mm
30
°
X