[10]
3.6.1.
Digit On-Off
It is in the “Advanced Setting” menu.
You can determine the closed digit number by “Hide X” menu . You can close digit numbers up to 5 digits. Please
enter the digit number which will be closed by keyboard and press “ENTER” to save
Please repeat the same way for the other axes.
3.6.2.
Axis Addition
Only for lathe and bohrwerk machine tools the axis addition can be used.
You can use this option by “Advanced Setting”
by“1” button you can active and “0” button you can passive. On lathes it adds and Z axis. On bohrwerk machine tools
it adds Z and W axis.
In this menu if addition is active, on lathes Z axis , on Bohrwerks W axis can’t be change by manuel.
3.6.3.
4. Axis Type
The encoder type which will be used on 4. axis means W axis must be enter.
If a rotary encoder will be used press “1” button. On X axis “1” writing and on Y axis “rot” writing will be seen. If a
linear encoder will be used “0” button must be pressed. On X axis “0” writing and on Y axis “Lin” writing will be seen.
3.6.4.
Calculator Decimal Setup
This menu determines the decimal number of the calculations on the calculator.
3 or 4 digits can be seen after point. The decimal number can be enter by keyboard. After press “ENTER” to save the
value.