Atec 8000, Руководство по эксплуатации и обслуживанию, Страница: 21 / 80

Atmospheric Technology 15
Touching the site label box brings up an alphanumeric keypad that can be used to
input a site specific label (e.g. East River Site No. 2) that appears on the main
screen.
TouchScreen
Pressing the TouchScreen button brings up the touchscreen calibration routine.
The screen is calibration by touching five crosses that appear at different places on
the sceen. After all the crosses have been touched, touch the middle of the screed
to teminate the routine and to save the new settings.
Set
Pressing the
Set
button saves the data that was entered in the Set-up screens and
returns the program to the main screen.
Update
If the Update button is pressed, the sampler searches for the presence of a jump
drive in the USB connector below the screen. If the jump drive is present and has
the proper updating files, the sampler software will be updated. If the update is
successful, a message will appear on the screen instructing that file transfer was
successful and that the system will reboot. If the jump drive cannot be recognized or
it does not have the proper update files, a message will be display warning of an
incomplete update and no software changes will be made.
5.3 Schedule
The Schedule tab is used to enter sampling schedules for the cartridges.
Ccartridge channels can run independently or together (co-located sampling). When
the
Schedule tab is pressed, a yellow screen appears which shows the start date,
start time, and sample duration for Port 1. The values in each box can be changed
by touching the text box and using the keypad to enter the appropriate values. All
times are military times with midnight as 00:00. A 24-hour sample would be entered
with a start time of 00:00 and a duration of 24:00 hours for the date entered in the
“date” box. An identification label (e.g. Can 13420, Cart A6672) can also be