Atec 8000, Руководство по эксплуатации и обслуживанию, Страница: 17 / 80

Atmospheric Technology 11
Aborted
—Operator terminated sampling
Finished
—A successful sample has been collected without errors
Leak Err
—Cartridge failed spedified leak rate tolerance on start-up
Post Leak Err—
Cartridge failed auto leak check at the end of sampling
Temp Tol —Ozone scrubber temperature exceeded ± 5 ° C
Flow Tol— Specified c a rtridge flow rate tolerance exceeded
Zero Tol—
Cartridge MFC required more than 1% zero compensation
Errors— Multiple errors, power outage, or sample aborted
4.6 Ozone Scrubber Temperature
The temperature of the ozone scrubber is displayed in the lower right hand corner of
the screen.
4.7 Abort
The Abort button is used to terminate sampling after purging has started. Pressing
the Abort button will require the operator to enter a new sampling sequence to
resume sampling.
4.8 Function Tabs
Several function tabs are located along the top of the screen to enable the operator
to interact with the sampler to set the date and time, enter operating parameters,
input a sampling schedule, retrieve data, leak check cartridges, set-up the sampler
using the SOP (Standard Operating Procedure) option, manually operate the
hardware, and input advance system parameters. The operation of each tab is
described in the Programming Section.